Welded Steel Workbenches

Model
WST2-2448-36

Model
WST1-2448-36

3000 lb. Capacity UDL

Smooth 12 gauge steel top is reinforced with angle iron on the underside and gussets in the corners for exceptional strength and rigidity. Legs and lower braces are 1-1/2" x 1-1/2" x 3/16" thick angle iron. Legs have 2" square footpads with 9/16" hole for mounting to the floor. These all-welded units ship fully assembled and ready for immediate use. 36" overall height.

Workbench with Half-Lower Shelf – Half depth 12 gauge lower shelf with lip at rear provides room for additional storage while leaving ample room for legs when seated. Capacity 500 lbs.

Workbench with Open Base - Angle iron cross braces are centered to allow leg room on both sides.

D x W x H	With Lower Shelf Model No.	Wt.	With Open Base Model No.	Wt.
24 x 48 x 36	WST2-2448-36	109	WST1-2448-36	87
24 x 60 x 36	WST2-2460-36	136	WST1-2460-36	109
30 x 48 x 36	WST2-3048-36	124	WST1-3048-36	98
30 x 60 x 36	WST2-3060-36	153	WST1-3060-36	121
30 x 72 x 36	WST2-3072-36	186	WST1-3072-36	142
36 x 60 x 36	WST2-3660-36	174	WST1-3660-36	136
36 x 72 x 36	WST2-3672-36	201	WST1-3672-36	157
36 X 84 X 36	WST2-3684-36	224	WST1-3684-36	177

__________________________

Model
WSH2-2448-36

HARDBOARD OVER STEEL TOP - 1/4" Hardboard surface attached directly over 12 gauge steel top. Hardboard will help to deaden the sound of heavy blows and metal to metal contact. Hardboard is a more 'forgiving' surface than steel and will help protect parts.

Size
D x W x H

With Lower Shelf

Model No.

Wt.
With Open Base
Model No. Wt.

24 x 48 x 36

WSH2-2448-36

116
WSH1-2448-36 94

30 x 48 x 36

WSH2-3048-36

132
WSH1-3048-36 106

36 x 60 x 36

WSH2-3660-36

186
WSH1-3660-36 147

36 x 72 x 36

WSH2-3672-36

216
WSH1-3672-36 172

36 X 84 X 36 WSH2-3684-36 244 WSH1-3684-36 197

OPTIONS AVAILABLE

Riser Shelf
12" high x 10" deep. - R

Locking Drawer
13" W x 17"D x 4-1/2"H
(Mounted on left side). - DR